Contents: Removal ↡ Installation ↡
Removal
1. Drain the oil from the gearbox.
2. Remove the left 6 or right half shafts (see figure 6.24).
Figure 6.24. Gearbox axle shaft seals:
1. Right rotating axle shaft seal,
2. Left rotating axle shaft seal,
3. Right axle shaft,
4, 5. Bolts,
6. Left axle shaft.
3. Remove the central shaft together with the bearing.
4. Remove the left axle shaft.
5. Remove the left rotating seal of axle shaft 2.
6. Remove the right rotating seal of the axle shaft 1.
Installation
7. Installation is carried out in the reverse order of removal. Check the seals for damage. Lubricate the seals with oil. Check the gearbox oil level and adjust it if necessary.
[Information copied from the website: www.mercedesman.ru]