Diesel engine lubrication system 2.3L Mercedes Vito 1
Engine oil pan Removing 1. Disconnect the negative cable from the battery. 2. Drain the engine oil. 3. Remove the top 1 and bottom 3 compressed air pipes and air inlet pipe 2 (see fig....
Oil filter housing Removing 1. Remove the oil filter. 2. Remove and disconnect the oil cooler 9 from the oil filter housing 4 together with the attached cooling system pipes (see...
Oil radiator Removing 1. Drain the coolant. 2. Remove oil filter 1 (see fig.4.44). Pic. 4.44. Oil radiator: 1. Oil filter, 2. Oil filter housing, 3, 4. Tubes of the cooling system,...
Oil level sensor Removing 1. Turn off the ignition. 2. Remove bottom insulation. 3. Drain the engine oil. 4. Disconnect the wiring connector B9.1 from the oil level sensor (see...
Oil pressure sensor Removing 1. Turn off the ignition. 2. Disconnect wiring connector B 11.1 from the oil pressure sensor (see fig.4.46). Pic. 4.46. Oil pressure sensor: Q11.1. Oil pressure...