Clutch mechanism The clutch is designed to transmit torque from the engine to the gearbox. The clutch mechanism of the described vehicle is a traditional single-disk dry friction clutch...
Clutch mechanism control Standard clutch design for all types of engines of this car with dual flywheel (TMF) is the presence of automatic adjustment of the membrane spring. VN 3.002 When...
Automatic clutch release system Clutch disengagement Automatic gearbox control unit (N15/6) sends a control signal to the valve (4) in the valve block (IN). The valve opens the pressure supply (5) into...
Checking clutch parts during repair Checking the release pad The release pad may be replaced in the following cases: after bearing overheating; in case of uneven rotation (by hand) or increased thruster...
Removing the coaxial clutch slave cylinder The clutch slave cylinder is attached to the gearbox housing (1) with four screws (3). VN 3.014: 1. manual transmission; 2 Release pad; 3 screws
Removal and installation of the clutch pedal To remove the clutch pedal, remove the retainer (2) and remove the pedal axle (3) Then, removing the latch (4), remove axle (8) stem forks (7) clutch master cylinder VN...
Clutch pedal bracket VN 3.016: 1. Clutch pedal; 2. Spring retainer of the supply hose; 3. Supply hose of the clutch master cylinder; 4. Clutch master cylinder; 5. Nuts for fastening the...