Car clutch repair Mercedes E-Class (W123)
Clutch design and specifications
Clutch - dry, single-disk, with a central pressure diaphragm spring, with hydraulic drive. Hydraulic system with automatic compensation of friction lining wear....
Clutch - dry, single-disk, with a central pressure diaphragm spring, with hydraulic drive. Hydraulic system with automatic compensation of friction lining wear....
Removal and installation the clutch
To remove the clutch, you need to remove the gearbox from underneath the car. Removal Checking the wear of the clutch driven disc: the 0.8mm thick feeler gauge fork...
To remove the clutch, you need to remove the gearbox from underneath the car. Removal Checking the wear of the clutch driven disc: the 0.8mm thick feeler gauge fork...
Removal and installation the clutch slave cylinder
Clutch Release Drive Parts 1 - spring; 2 - plates; 3 - eccentric bolt Removal 1. Place the car on a lift. 2. Unscrew the supply hose from the working cylinder. 3. Plug...
Clutch Release Drive Parts 1 - spring; 2 - plates; 3 - eccentric bolt Removal 1. Place the car on a lift. 2. Unscrew the supply hose from the working cylinder. 3. Plug...
Removal and installation the clutch master cylinder
Removal 1. Remove the panel under the instrument panel. 2. Remove the floor mat near the driver's seat. 3. Use a syringe to suck out fluid from the clutch hydraulic...
Removal 1. Remove the panel under the instrument panel. 2. Remove the floor mat near the driver's seat. 3. Use a syringe to suck out fluid from the clutch hydraulic...
Bleeding the Clutch Hydraulic Drive
1. Place a hose on the head of the working cylinder fitting and connect its free end to a device for bleeding hydraulic systems adjusted to minimum pressure. 2. Remove...
1. Place a hose on the head of the working cylinder fitting and connect its free end to a device for bleeding hydraulic systems adjusted to minimum pressure. 2. Remove...
Clutch malfunctions and methods of their elimination
Clutch malfunctions and methods of their elimination Cause Elimination The clutch is jerking Low RPM Adjust the speed The release bearing is damaged Check, repair Uneven...
Clutch malfunctions and methods of their elimination Cause Elimination The clutch is jerking Low RPM Adjust the speed The release bearing is damaged Check, repair Uneven...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More similar sections for repairing other models
☛ Transmission: Clutch car Mercedes W168 (1997-2004)
☛ Transmission: Clutch and drive shafts car Mercedes W203 (2000-2007)
☛ Transmission: Clutch car Mercedes W163 (1997-2005)
☛ Transmission: Clutch and drive shafts car Mercedes W140 (1991-1998)
☛ Transmission: Clutch car Mercedes Vito 2 (2003-2014, diesel)
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Vehicle description
- Working conditions and tools
- Car care
- Diesel engines
- Engine repair
- Lubrication system
- Cooling system
- Injection system
- Supply system
- Exhaust system
- Gasoline engines
- Engine repair
- Lubrication system
- Cooling system
- Control system
- Power and exhaust system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Car suspension
- Steering
- Tires and wheels
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Doors and windows
- Heating and ventilation
- Electrical equipment
- Equipment and devices
- Power devices
- Lighting and signaling
- Electrical circuits
- General information
- Governing bodies
- Driving and operation
- Weekly care
- Maintenance (gasoline)
- Maintenance (diesel)
- Troubleshooting
- Power unit
- I4 petrol engine
- V6 petrol engine (SOHC)
- V6 petrol engine (DOHC)
- Diesel engines
- Engine overhaul
- Cooling system
- Heating and ventilation
- Fuel system (carburetor)
- Injection system «Bosch CIS-E»
- Injection system «Bosch HFM»
- Diesel fuel system
- Supply system
- Starting and charging system
- Ignition system (I4)
- Ignition system (V6)
- Preheating
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Brake system
- Car suspension
- Steering
- Body
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Electrical equipment
- Equipment and devices
- Switches
- Headlights and lighting
- Electrical circuits
- General information
- Introduction to the guide
- Power unit
- Engine device
- Repair M102 engines
- Repair M110 and M123 engines
- Cooling and lubrication (M102)
- Cooling (M110 and M123)
- Ignition system
- Power system «Stromberg»
- Power system «Solex 4A1»
- Fuel injection «K-Jetronic»
- Fuel injection «L-Jetronic»
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Cardan and rear axle
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Electrical equipment
- Equipment and devices
- Power devices
- Electrical circuits