Car clutch and drive shafts Mercedes S-Class (W140)

Clutch and Differential Specifications
Note: Individual characteristics are also given in the text of the Chapter and, if their implementation is mandatory, are highlighted in bold. General parameters Amount...

Clutch — General Information
The clutch is designed (in general) for short-term disconnection of the engine shaft from the transmission, as well as their subsequent smooth connection, which is...

Removal and installation the clutch
Clutch design 5 - Slave disk; 6 - Pressure plate; 7 - Clutch release bearing; 8 - Clutch release lever; 9 - Bolt; 02 - Installation tool Removal 1. Remove the gearbox...

Removal and installation the clutch master cylinder
Clutch Master Cylinder Installation Details 10 - Pedal bracket; 11 - Master cylinder; 12, 29 - Retaining rings; 13 - Nut; 14 - Connecting tube; 15 - Return spring; 17 -...

Removal and installation the clutch slave cylinder
Removal Clutch slave cylinder installation details 1 - Clutch slave cylinder; 2 - Plastic gasket; 9 - Tube; 20 - Bolts; 21 - Clutch hydraulic line bleed valve 1. Unscrew...

Removal and installation the propeller shaft
Removal Cardan shaft installation details 2 - Cardan shaft; 5, 21, 200a - Bolts; 6, 20, 36 - Washers; 7, 35, 88, 200 - Nuts; 18 - Engine support; 19 - Engine support...

Drive shafts — general information
The car is driven by transmitting torque from the gearbox to the wheels via two drive shafts of different lengths. The right shaft consists of two parts. The dust boots...

Removal and installation the drive shaft flange and radial thrust ball bearing
Removal Drive shaft flange and angular contact ball bearing 1. Remove the drive shaft. 2. Remove the brake disc. 3. Remove the parking brake shoes. 4. Remove the drive...

Removal, checking and installation the drive shaft
Removal 1. Remove the exhaust system from the flange connection. 2. On models with ABS/ASR before 05/95, when removing the right drive shaft, remove the cable guide. 3....

Removal and installation of CV joints of drive shafts and their protective covers
Removal Design of drive shaft joints and installation details of their protective covers 37a - Drive shaft; 37b - Outer hinge; 37c - Inner hinge; 37d - Joint hub; 37th -...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More similar sections for repairing other models

☛ Transmission: Clutch car Mercedes W168 (1997-2004)
☛ Transmission: Clutch and drive shafts car Mercedes W203 (2000-2007)
☛ Transmission: Clutch car Mercedes W210 (1996-2002)
☛ Transmission: Clutch car Mercedes W163 (1997-2005)
☛ Transmission: Clutch car Mercedes Vario 814D (1996-2003, diesel)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code

W140 (1991-1998)