Vehicle transmission differential Mercedes S-Class (W140)
Disassembly, assembly and testing of the differential
Disassembly Differential design 13 - Differential housing; 14 - Spherical washers; 15 - Satellites; 16 - Finger; 17 - Bevel gears of drive shafts; 18 - Thrust washers;...
Disassembly Differential design 13 - Differential housing; 14 - Spherical washers; 15 - Satellites; 16 - Finger; 17 - Bevel gears of drive shafts; 18 - Thrust washers;...
Disassembly and assembly of the main gear reducer and adjustment of gear clearances
Disassembly Design of the main gear reducer (models 140.02/03 from 01.06.94 and differential diameter 198 mm) 11a, 43e, 46b - Bearing outer rings; 11b, 43d, 46a - Inner...
Disassembly Design of the main gear reducer (models 140.02/03 from 01.06.94 and differential diameter 198 mm) 11a, 43e, 46b - Bearing outer rings; 11b, 43d, 46a - Inner...
Determining the thickness of the adjusting shim and installing it in the gearbox housing
1. Fix the indicator to the clamp and install the measuring plate. 2. Set the indicator to "0" with a 3 mm tension on the measuring disk (051), - the height of the...
1. Fix the indicator to the clamp and install the measuring plate. 2. Set the indicator to "0" with a 3 mm tension on the measuring disk (051), - the height of the...
Checking and adjusting the flange clearance
Checking and adjusting the clearance between the flange (33) and the bevel gear of the drive shaft (17) using a retaining ring. Check the clearance between the flange...
Checking and adjusting the clearance between the flange (33) and the bevel gear of the drive shaft (17) using a retaining ring. Check the clearance between the flange...
Disassembly and assembly of the main gear reducer and adjustment of gear clearances (models up to 31.05.94)
Design of the main gear reducer (models 140 28/032/033 up to 31.05.94, 140.042/043/063/1 and differential diameter 210 mm) A - Standard version; B - Version with ASR; C...
Design of the main gear reducer (models 140 28/032/033 up to 31.05.94, 140.042/043/063/1 and differential diameter 210 mm) A - Standard version; B - Version with ASR; C...
Disassembling and assembling a differential with automatic locking
Differential with automatic locking A — Block of friction discs with driven gear with diameter of 185 mm B — Block of friction discs with driven gear with diameter of...
Differential with automatic locking A — Block of friction discs with driven gear with diameter of 185 mm B — Block of friction discs with driven gear with diameter of...
Replacing the differential cylinder with automatic locking (models up to 31.05.94)
Models 140.028/032/033 produced before 31.05.94 and 140.1 with code 211a. Note: Differential diameter is 210 mm. Replacing the differential cylinder with automatic...
Models 140.028/032/033 produced before 31.05.94 and 140.1 with code 211a. Note: Differential diameter is 210 mm. Replacing the differential cylinder with automatic...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More similar sections for repairing other models
☛ Transmission: Differential car Mercedes W203 (2000-2007)
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Introduction to guide
- User manual
- Maintenance
- Power unit
- Engine repair
- Cooling and heating systems
- Power and exhaust systems
- Ignition and control system
- Charge and launch systems
- Transmission
- Automatic gearbox
- Drive shafts
- Chassis
- Brake system
- Front suspension
- Rear suspension
- Steering
- Body
- Body elements
- Electrical equipment
- Equipment and devices
- Electrical circuits
- User manual
- Controls and instruments
- Driving and operation
- Maintenance
- Power unit
- Petrol engine V6
- Petrol engine V8
- Petrol engine V12
- Diesel engine OM603
- Diesel engine OM606
- Cooling system
- Power supply and injection system
- Control system HFM-SFI
- Control system LH-SFI
- Control systems ME-SFI
- Diesel control system
- Ignition system
- Charge and launch system
- Transmission
- Mechanical gearbox 717.438
- Mechanical gearbox 717.454
- Automatic gearbox 722.5
- Automatic gearbox 722.6
- Clutch and drive shafts
- Differential
- Chassis
- Brake system
- Steering
- Front suspension
- Rear suspension
- Body
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Electrical circuits
- General information
- Introduction to guide
- Power unit
- 8-cylinder V8 engine
- 6-cylinder I6 engine
- Cooling and lubrication system
- Power system (carburetor)
- Fuel injection system
- Ignition system
- Transmission
- Clutch and cardan
- Car gearbox
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Electrical equipment
- Power devices
- Electrical circuits