Disassembly
Differential design
13 - Differential case; 14 - Spherical washers; 15 - Satellites; 16 - Finger; 17 - Bevel gears of drive shafts; 18 - Thrust washers; 19 - Roller pin
1. Fix the differential housing (13).
2. Use a punch to knock out the roller pin (19) and differential pin (16) from the differential housing (13).
3. Remove satellites (15) with spherical washers (14) and bevel gear drive shafts (17) with thrust washers (18).
4. Check each element for wear.
Assembly
1. Insert pin (046) hole in the differential case.
2. Install both drive shaft bevel gears (17) with thrust washers (18) on the pin in the differential case.
3. Install both satellites (15) with spherical washers (14) and turn them with a pin (046).
4. Instead of the differential pin, insert the pin (021) into the differential housing to secure the bevel gears of the drive shafts and satellites.
Examination
1. Check the torque of the differential. It should be 5-30 Nm.
2. Install differential pin (16) and roller finger (19).
3. Remove the differential housing from the vise.