Brake system — general information Dual-circuit hydraulic brake system with optical warning device acting from the pedal to all four wheels with a vacuum booster. The brakes of the front and rear wheels...
Replacing the brake pads of the front wheels As already mentioned, fixed calipers are installed on the front wheels. There are two pistons in the caliper. Brake pads must be replaced if the thickness of the...
Removal and installation of the front caliper Raise the front of the car and remove the wheels. Put a hose on the bleed valve and lower the other end of the hose into a suitable container. Open the fitting and press...
Front caliper overhaul Before carrying out any work, pay attention to the following points: O-rings must be replaced with new ones after disassembly. Do not use pistons and cylinders with...
Rear caliper overhaul The halves of the caliper should not be separated during disassembly, because when assembled at the factory, the mounting bolts were tightened to a specific tightening...
Removal and installation of brake disks of back wheels If necessary, the working surfaces of the brake discs can be machined. In this case, it is necessary to determine the minimum allowable dimensions of parts after...
Master brake cylinder All car models are equipped with a master brake cylinder with two working cavities, which are connected to a double reservoir that ensures the flow of brake fluid into...
Removal and installation of parking brake pads The parking brake is a self-powered mechanism with any rotation of the brake drum. The installation tool mentioned in the text is required for removing and installing...
Brake booster Disassembly of the brake force booster is not provided, because. disassembly and assembly of the amplifier can only be carried out in specialized workshops. A failure of...
Removing air from the hydraulic brake system Removal of air from the hydraulic brake system is necessary after the depressurization of the pipelines or if air enters in another way. Before removing air from the...
Brake Specifications Service brake system - hydraulic dual-circuit Parking brake system - mechanical, acts on the rear brakes Execution of brakes — disk on all wheels Brake Pad Adjustment -...
Tightening torques for threaded connections Brakes Bolts with an internal hexagon of fastening of a brake disk on a nave of a forward wheel — 115 Nm Mounting bolts for mounting the caliper to the pivot pin - 115...