Steering — removal and installation All models of cars are equipped with a steering mechanism with circulating balls. Turning the steering wheel changes the steering gear ratio. With an increase in the...
Steering gear All self-locking nuts are used only once and must be replaced after each disassembly. Press out the ball joints using a suitable puller, the removal and installation of...
Power steering — removal The power steering facilitates driving in various conditions, on the one hand, when driving at low speeds, it facilitates steering, and when driving at high speeds, it...
Power steering pump When removing the pump, carry out the following work: Loosen the wing nut securing the tank cover. Remove cover, spring and damper (see fig. 239). Pic. 239. Power...
Steering Specifications Steering Designation - LS 90 power steering Part number - 116 460 0801 1st version, 116 460 1001 2nd version Jet Plunger Diameter: 1 version - 10.0 mm 2 version - 9.0 mm...
Tightening torques for threaded connections Wheel Wheel bolt - 100±10 Nm Steering Bolts of fastening of the steering mechanism to a body — 70 - 80 Nm Nut for fastening the bipod to the steering shaft - 160 - 200...