Car steering Mercedes G-Class (W463)

General information about steering
The steering drive is organized according to the "trapezoid" scheme by means of a hydraulically reinforced worm gear with circulating balls and a trauma-safe adjustable...

Checking the steering pump pressure
Petrol models Preparing to check the pressure characteristic of the steering pump (petrol models) 1 - Air intake; 2 - Expansion hose of the pressure line; 7 - Power...

Checking and adjusting the hydraulic limiter
Checking and adjusting the hydraulic steering limiter 1 - Limiting valve (arrow); 2 - Hex bolt; 3 - Locking insert; 4 - Lid; 5 - Steering wheel 1. Jack up the front of...

Steering shaft adjustment
1 - Rod wrench (Allen) 2 — Lock nut 3 - Adjusting screw 1. Press the transverse rod out of the steering knuckle (see Section Removal and installation the steering gear...

Evaluation of the condition of the steering drive components
The universal joint (arrow) of the steering shaft should not have noticeable axial and radial play Visually inspect all tie rod ends 1 — Tie rod end 2 — Pivot arm/bipod...

Removal and installation the steering wheel
Steering wheel installation details 1 — Steering wheel heating device wiring connector 32 — Steering wheel 32c - Countersunk head screw Contact cable drum (A45) steering...

Removal and installation the steering wheel contact cable drum
Details of installation of contact cable drum on models produced up to 30.06.02. 32h - Mounting bolts A54 - Cable drum B24/8 - Steering wheel angle sensor Details of...

Removal and installation the steering wheel angle sensor
Steering wheel angle sensor installation details for models produced up to 30.06.02 A45 - Contact cable drum B24/8 - Steering wheel angle sensor Steering wheel angle...

Removal and installation the electronic steering column lock mechanism
Electronic Steering Column Lock (ELV) Mechanism Installation Details 37m - Mounting bolt 37p - Connector 71 — Column sleeve N₂6/5 — Electronic lock control module 1. On...

Removal and installation a steering column with electric adjustment
Note: All self-locking fasteners must be replaced! Electrically Adjustable Steering Column Installation Details (1 of 3) 3 - Electrical wiring connectors; 4 - Distance...

Removal and installation the steering pump
Models with VT 161, VT 167, ZL 167, LF 67/14 and ZF 67/14 Steering pump installation details (models with VT 161, VT 167, ZL 167, LF 67/14 and ZF 67/14) 1 - Fixators; 2...

Removal and installation of the power steering fluid cooling line
Models 463.246/249/250/333 Power Steering Fluid Cooling Line Installation Details for Models 463.246/249/250/333 (1 of 2) 1 - Return hose 3 - Steering gear return hose...

Removal and installation the steering gear
Petrol models The corresponding illustrative material is presented in the illustration Steering drive organization diagram and the illustrations below, to which all...

Steering mechanism design
Steering mechanism design 1 - Body; 2, 26 - Washers; 3, 22, 35, 41 - Bolts; 4, 51 - Retaining rings; 5 - Lid; 6, 8, 13, 14, 16-20, 23, 28, 32, 33, 37-40, 46, 48, 49 -...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More similar sections for repairing other models

☛ Chassis: Steering car Mercedes W168 (1997-2004)
☛ Chassis: Steering car Mercedes W203 (2000-2007)
☛ Chassis: Steering car Mercedes W124 (1984-1995)
☛ Chassis: Steering car Mercedes W163 (1997-2005)
☛ Chassis: Steering car Mercedes W116 (1972-1980, petrol)
☛ Chassis: Steering car Mercedes Vito 2 (2003-2014, diesel)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code

W463 (1999-2019)