Contents: Models 463.246/249/250/333 ↡ Models 463.323 ↡
Models 463.246/249/250/333
Power Steering Fluid Cooling Line Installation Details for Models 463.246/249/250/333 (1 of 2)
1 - Return hose
3 - Steering gear return hose
Power Steering Fluid Cooling Line Installation Details for Models 463.246/249/250/333 (2 of 2)
2 — Cooling tract line
4 - Nut
1. Lower the front grille forward (see Chapter Body).
2. Remove the left headlight (see Chapter On-board electrical equipment).
3. Remove the left wheel arch protection liner.
4. Pump out the fluid from the power steering reservoir.
5. Disconnect the return hose (1) from the cooling system line (2) - be prepared to collect any spilled liquid.
6. Disconnect the return hose (3) of the steering gear from the line (2) - be prepared to collect any spilled fluid.
7. Turn the steering wheel from lock to lock several times - ask an assistant to collect the liquid displaced from the hose (3).
Attention! To avoid failure of the steering pump, do not leave the engine running under any circumstances!
8. Loosen the nuts (4), remove the cooling tract line (2) and drain the liquid from it into a prepared container.
9. Installation is carried out in the reverse order, do not forget to fill the power steering reservoir with fresh fluid.
Models 463.323
Power Steering Cooling Line Installation Details for Models 463.323 (1 of 2)
1 - Left horn
2 - Return pipe
3 — Cooling tract line
4 - Bolt
Power Steering Cooling Line Installation Details for Models 463.323 (2 of 2)
3 — Cooling tract line
4 - Bolt
1. Remove the front grille (see Chapter Body).
2. Remove the left headlight (see Chapter On-board electrical equipment).
3. Pump out the fluid from the power steering reservoir.
4. Disconnect the left horn (1).
5. Disconnect the return lines (2) from the power steering cooling line (3).
6. With an assistant helping to collect the fluid being forced out of the hose, turn the steering wheel from lock to lock several times.
7. Loosen the bolts (4), remove the cooling tract line (3) and drain the liquid from it into a prepared container.
8. Installation is carried out in the reverse order, do not forget to fill the power steering reservoir with fresh fluid.