1 - Rod wrench (Allen)
2 — Lock nut
3 - Adjusting screw
1. Press the transverse rod out of the steering knuckle (see Section Removal and installation the steering gear).
2. Loosen the lock nut (2) on the steering shaft.
3. Turn the adjusting screw (2) of the shaft approximately 1/8 turn clockwise.
4. Turn the steering wheel from lock to lock several times.
5. Using a torque wrench, evaluate the steering shaft's resistance to rotation - maximum resistance should occur in the straight-ahead position. If the resistance to rotation is insufficient (see Specifications), arm yourself with a rod wrench (1) and turn the adjusting screw (3) counterclockwise, otherwise the screw should be turned clockwise.
6. Having achieved the required result, fix the screw (3) and tighten the lock nut (2).
7. Connect the rod to the bipod.