Checking and adjusting the clearance between the flange (33) and the bevel gear of the drive shaft (17) using a retaining ring.
Check the clearance between the flange (33) and the bevel gear of the drive shaft (17) - if necessary, select a retaining ring (30a) of the appropriate thickness. Rings with a thickness of 1.4 mm to 2.7 mm 1 with a step of 0.05 mm are produced. The nominal value of the clearance between the flange and the differential housing is 0.03 - 0.3 mm.
Original source of information MercedesMAN