Internal elements of the car body Mercedes E-Class (W210)

Car interior — general description
The interior of the E-class is designed in a calm, restrained style. Smooth soft lines prevail in the design. The driver's seat is well organized, the instruments are...

Instrument cluster and switches in the cabin
The switch closes the electrical circuit of the corresponding device. In the E-class cars, Mercedes-Benz used a completely new generation of switches. All buttons,...

Troubleshooting window lifters
The electric windows are controlled by buttons on the center console regardless of the position of the key in the ignition. The fuses for the windows are located in the...

Repair of window lifts on the road
If the window lifter fails on the road, there is no need to drive with the window open, especially in bad weather. The situation can be corrected, it is only important...

Electric window switches
Fig. 10.8. Some switches are located on the center console next to the gear shift lever: 1 – cladding; 2 – window lift switch; 3 – connector comb The electric windows...

Removal the power window switch
Sequence of works 1. Remove the center console trim and secure it to the gearshift lever. 2. Press the switch from below the trim with your hand and remove it. 3. The...

Central locking with pneumatic drive
The infrared control system in combination with the security system is installed as standard on E-Class models. The pneumatic central locking is controlled by switches...

Troubleshooting the Central Locking System
Sequence of works 1. First, find out which part of the system is faulty: electrical or pneumatic. To do this, listen to see if the pump turns on at the back when you...

Adjusting the rear view mirrors
Four contacts are connected to the small rearview mirror adjustment knob to move the mirror up, down, right and left. In addition, its body contains a switch for...

Checking the electric drive for rear view adjustment
If the adjustment mechanism does not work when you press the adjustment knob, check the power supply. Sequence of works 1. Check fuse #16 (see " Electrical equipment ")....

Disassembling the rear view mirror
Both exterior rearview mirrors are electrically adjustable. Switching is carried out by a handle on the central console. The mirrors are fixed on the outside of the...

Cigarette lighter — replacement
The cigarette lighter is connected directly through a fuse. If the device does not work, although the fuse is in good condition, then the heating element has...

Checking the rear window defroster
The rear window defroster circuit is protected by fuse #19 in the fuse box next to the battery and receives voltage when the contact of the corresponding relay in the...

Removal the radio
This description applies only to the standard radio. However, it should be borne in mind that depending on the year of manufacture and the vehicle's configuration, its...

Removal the speakers
Sequence of works In front 1. Pry up the triangular protective grille from the outside with a 1–2 cm wide wooden or plastic object. 2. Disconnect the speaker connector....

Replacing interior lighting bulbs
Sequence of works Front ceiling light 1. Pry up the diffuser with a screwdriver. Fig. 10.17. After removing the diffuser, the spotlight lamp can be replaced (arrows) 2....

Replacing the remaining lamps in the cabin
Sequence of works Lighting in sun visors Fig. 10.20. Spotlights in sun visors are installed in spring contacts (arrows) Use a screwdriver to pry off the cover (hole in...

Removal the front seats
Compared to previous models, the seat area in the E-Class is larger and the shape follows the contours of the body better, especially in the sports version. The front...

Removal the rear seat
Sequence of works Fig. 10.28. To remove the rear seat cushion, press the slightly recessed inward latches (arrow) on the right and left 1. Press the retaining springs on...

Removal the rear headrests
Sequence of works 1. To remove, lift the headrests. 2. Move the rear shelf upholstery forward and at the same time lift it from the side with a wide object. 3. Slide the...

Heated seats
Fig. 10.30. External view of the front passenger footwell with the mat removed: 1 – body bottom; 2 – seat belt tensioner system control unit; 3 – seat heating system...

Checking seat belts
Fig. 10.29. On the T-model (station wagon), the rear seat cushion must be removed from the hinges (arrows) If the front seat belt tensioners have been triggered in an...

Removal the glove compartment
Sequence of works 1. Open the lid. 2. Remove the lamp from the niche and take it off. To do this, remove the connector. 3. Remove the four plastic clips at the top and...

Removal the gearshift lever trim on the center console
Sequence of works 1. On vehicles with an armrest between the front seats, open the drawer. Models with manual transmission 2. Slide the cover down along the lever. Take...

Removal the ashtray
Sequence of works 1. Remove the ashtray insert. 2. Remove the trim around the gear shift lever or lift it up at the front. 3. Remove the small storage drawer under the...

Removal the center console
Sequence of works 1. Remove the trim around the gear shift lever. 2. Remove the ashtray. Fig. 10.34. Fasteners (arrows) that must be unscrewed before removing the center...

Removal the heater control unit trim
Sequence of works 1. Remove the ashtray with glasses box. 2. Remove the radio. To do this, use the removal tool. Fig. 10.35. Removed rotary control knobs: 1 – fan...

Removal the B-pillar trim
Sequence of works 1. Remove the door frame trim along the center pillar. 2. Use a screwdriver to loosen the four clips at the top of the iron edge. 3. Remove the...

Removal the rear pillar trim
Sequence of works 1. Remove the trim cord from the top of the door frame. 2. Using a suitable tool, release the front edge of the trim from the three fasteners. 3. Feed...

Removal the rear shelf
Sequence of works 1. Remove the rear seat cushion and backrest. 2. Remove the headrest. 3. Remove the rear pillar trim on both sides. 4. Remove the three bolts on the...

Removal the trim under the dashboard
Sequence of works 1. The air duct deflector that supplies warm air to the feet is secured with a plastic clip, which must be turned 90° to unscrew. 2. Unscrew the...

Removal the upholstery in the pedal area
Sequence of works 1. Remove the air duct deflector. 2. Pull the hood release lever. Pull the parking brake lever. If equipped, press the steering column adjustment...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More similar sections for repairing other models

☛ Body: Interior (all models) car Mercedes W168 (1997-2004)
☛ Body: Interior (internal elements) car Mercedes W202 (1993-2000)
☛ Body: Interior (internal elements) car Mercedes W463 (1999-2019)
☛ Body: Interior (internal elements) car Mercedes W163 (1997-2005)
☛ Body: Interior (internal elements) car Mercedes W140 (1991-1998)
☛ Body and electrical equipment: Interior (internal elements) car Mercedes Vario 814D (1996-2003, diesel)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code

W210 (1996-2002)

W124 (1984-1995)