Vehicle drive shafts Mercedes E-Class (W124)

Technical characteristics of drive shafts
Main reverse gear Type Rigidly attached to the rear suspension cross member Drive shafts Type Steel, with constant velocity joints (CV joints) on both sides of the shaft...

General information about drive shafts
The connection of the two parts of the cardan shaft is carried out by a splined sliding coupling. This connection allows the rear part of the cardan shaft to move along...

Changing the oil in the rear final drive
Unscrewing the oil drain plug from the rear final drive 1. Drive the vehicle a sufficient distance to warm up the rear final drive to normal operating temperature. 2....

Removal and installation the rear final drive
Caution! When installing the rear final drive, it is necessary to use new rear propeller shaft mounting nuts, drive shaft mounting bolts and rear final drive housing...

Replacing the rear final drive sealing rings
Replacing the rear final drive seal rings is a complex task that requires partial disassembly of the rear final drive, so this work should be performed at a service...

Drive shafts — removal and installation
Caution! When installing the drive shaft, it is necessary to use new nuts for fastening the drive shaft to the rear wheel hub and new bolts for fastening the drive shaft...

Replacement of protective covers of CV joints of the drive shaft
Removal the protective cover from the end of the inner CV joint Removal the clamps securing the CV joint protective cover Removal the retaining ring securing the inner...

Cardan shaft — removal and installation
Attention! When installing the propeller shaft, it is necessary to use new nuts for fastening the front and rear parts of the propeller shaft. Removal Location of the...

Rubber elastic coupling of the cardan shaft
Examination 1. Apply the handbrake, then raise the front of the car and secure it on stands. 2. Check the condition of the rubber flexible coupling connecting the front...

Central bearing of the propeller shaft
Examination 1. When the bearing wears out, characteristic noise and vibration appear. Remove the cardan shaft and check the condition of the bearing. 2. Check that the...

Universal joint of the cardan shaft
Examination 1. When the universal joint of the cardan shaft wears out, vibration and a creaking sound appear. The universal joint of the cardan shaft can be checked...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More similar sections for repairing other models

☛ Transmission: Drive shafts and cardan car Mercedes W163 (1997-2005)
☛ Transmission: Drive shafts car Mercedes W220 (1998-2005)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code

W210 (1996-2002)

W124 (1984-1995)