Doors, locks and windows of the car Mercedes E-Class (W210)
Removing the trunk lid Sequence of work 1. Open the trunk lid. Pic. 11.11. Removing the hinge cover 2. Remove hinge trim (pic. 11.11). 3. Using a wide screwdriver, carefully pry the trunk lid...
Trunk lid adjustment The purpose of the adjustment is to have an even gap between the trunk lid and the body parts on the right and left. From the side of the lower edge, it is necessary to...
Doors — general information In the production of cars at Mercedes factories, the doors are removed after painting for further assembly, after which they are reinstalled on the car. For this,...
Removing the front door Sequence of work 1. Lower the glass. Pic. 11.23. Removing the door sill trim with a suitable wide tool 2. Remove the protective trim on the door sill (pic. 11.23). Place...
Front door adjustment When adjusting, place the car on wheels on a flat horizontal platform. The gap around the perimeter of the door should be about 6 mm, the doors themselves should be...
Removing the rear door Sequence of work 1. Lower the glass. 2. With the rear door closed, remove one hex bolt at the top and bottom. 3. Remove the folding arm from the rack. 4. Pull out the...
Rear door adjustment Sequence of work 1. Loosen the top and bottom torque of the two hex bolts on the B-pillar. 2. Adjust clearances. Tighten the bolts. 3. Loosen the top and bottom of the...
Removing the door upholstery Sequence of work 1. Lower the glass. Pic. 11.27. Removing the lock cover 2. Turn out a bolt of fastening of facing of the lock and remove facing down (pic. 11.27). Pic....
Removing the door glass Sequence of work 1. Remove the door upholstery. 2. Remove the insulating film from the door body. Pic. 11.30. Power window mechanism: 1 – the electric motor of a window...
Removing the outer door handle Sequence of work Pic. 11.31. After the seal is removed (2) door at the level of the handle, access to its fixing bolt will open (1) with internal hexagon 1. Remove seal...
Removing the door lock Sequence of work 1. Remove the door upholstery. 2. Remove the insulating film from the door body. 3. Remove the outer door handle. 4. Lower the glass. Pic. 11.32. Bolts...
Windshield and rear window The windshield and rear windows are glued into the body of the car. These structural elements are taken into account when calculating the rigidity of the body in the...
Sunroof Pic. 11.33. Emergency sunroof closing The correct operation of this structural element depends on the accuracy of the adjustment, which is not described in the book. In...