General information about the body The car has a load-bearing body. The bodywork is made from forged and welded parts, including front and rear crumple zones and a rigid center section. Safety measures...
Car body care Checking the condition of the body should be done regularly. Otherwise, corrosion of individual sections of the body can lead to severe damage and further costly...
Caring for upholstery and rugs Fabric covers Clean upholstered seats with a vacuum cleaner or a stiff brush. Heavily soiled seats should be cleaned with dry foam. Treat greasy and oily stains with...
Repair of minor body damage Body scratch treatment If the scratch is superficial and does not reach the metal, wipe the area around the scratch with paint refresher or fine grit abrasive paste....
Repair of severe damage to the body In case of significant damage to the body and the need to replace a significant part of the parts, work must be done at the TO station. If the bodywork is damaged as a...
Front bumper — removal and installation Removing Unscrewing the nut located in the center of the bumper in its upper part The location of the plugs on the front license plate stand Removing the front license...
Rear bumper — removal and installation Removing Removing the rubber seal on the right side of the rear bumper Arrangement of nuts of fastening of a back bumper 1. The bumper clips are accessed from the...
Hood — removal, installation and adjustment Removing The location of the plugs on the inside of the hood The location of the bolts of the hinges to the hood 1. Open the hood and place a clean rag under the corners...
Hood opening cable — removal and installation Removing Removing the protective cover of the hood lock Disconnect the hood release cable from the back of the hood latch 1. Open the hood. 2. Unscrew the screw and...
Hood lock — removal and installation Removing Unscrewing the hood lock bolts Removing the hood lock 1. Open the hood, then release the mounting brackets and remove the protective cover from under the hood...
Exterior mirrors Mirror with manual adjustment 1. Loosen the bracket for the mirror adjustment knob and remove the knob. 2. On the inside of the door, remove the decorative mirror trim...
Exterior body parts Wheel arch lining and underbody 1. Decorative trims and panels attached to the lower part of the body are fastened with screws, nuts and brackets. Sequentially unscrew...