Wheel arch lining and underbody
1. Decorative trims and panels attached to the lower part of the body are fastened with screws, nuts and brackets. Sequentially unscrew the screws, release the brackets and remove the required panel. To remove most of the fastening brackets, you just need to wring them out. To remove the clips for fastening the panels, unscrew the screw from their central part or remove the pin, and then remove the clip.
2. When installing the panels, replace the fastening brackets that were broken during removal.
Body trim elements
1. Body trim elements are attached using a special adhesive tape. To remove the body trim elements, they must first be heated, as a result of which the adhesive layer softens, then they must be cut off from the surface of the body. When cutting body trim, be careful not to damage the body paintwork.