Car front suspension Mercedes E-Class (W123)

Design and technical characteristics of the front suspension
The front suspension is independent, with telescopic shock absorbers, coil springs, upper and lower arms and an anti-roll bar connecting the upper suspension arms. All...

Removal and installation front suspension springs
Note: When measuring the height of the body and adjusting the installation angles of the front wheels, it is necessary to use special equipment from the company...

Checking, removing and installing shock absorbers
Note. Shock absorbers can be replaced one at a time if both front suspension shock absorbers remain the same type. Cars can be equipped with shock absorbers with or...

Removal and installation the front anti-roll bar
Stabilizer bar 1. Apply the parking brake, raise the front of the vehicle and support the lower control arms. Remove the front wheels. 2. Unscrew the mounting bolts of...

Removal and installation the front suspension assembly
1. Remove the shock absorbers and suspension springs (see Removal and installation front suspension springs and Checking, removing and installing shock absorbers ). 2....

Removal, installation and adjustment of the hub and front wheel bearings
If you hear noise from the wheels while driving, especially on sharp turns, this indicates that the bearings are damaged. Front wheel hub section 1 - steering knuckle; 2...

Removal, disassembly and installation of the steering knuckle
1. Prepare the vehicle (see Removal and installation front suspension springs , Checking, removing and installing shock absorbers , Removal and installation the front...

Removal and installation the upper suspension arm
1. Prepare the vehicle by placing the lower suspension arms on supports. 2. Loosen the upper ball joint nut and use a puller to separate the upper suspension arm from...

Removal and installation the lower arm of the front suspension
1. Remove the front suspension shock absorber and spring. 2. Loosen the steering rod end nut and use a puller to disconnect the rod end from the steering knuckle. 3....

Removal and installation the front suspension auxiliary rod
Initial setting of auxiliary traction a = 14.0 mm 1. Remove the front suspension shock absorber and spring. 2. Fix the position of the lower suspension arm inner...

Checking and adjusting the front wheel alignment angles
Attention! Checking the wheel alignment angles is mandatory if replacement or repair of suspension parts is carried out, which may lead to a change in the wheel...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More similar sections for repairing other models

☛ Chassis: Front suspension car Mercedes W463 (1999-2019)
☛ Chassis: Front suspension car Mercedes W163 (1997-2005)
☛ Chassis: Front suspension car Mercedes W220 (1998-2005)
☛ Chassis: Front suspension car Mercedes Vito 2 (2003-2014, diesel)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code

W210 (1996-2002)

W124 (1984-1995)