Sequence of works
1. Remove the door trim.
2. Remove the insulating film from the door body.
Fig. 11.30. Window lift mechanism: 1 – window lifter motor; 2 – glass removal bolt; 3 – window regulator rail; 4 – glass; 5 – glass guide
3. Remove the outer and inner sealing strips 3 (fig. 11.30) door glass.
Ahead
4. Lower the glass 4 to a position where you can unscrew the window regulator bolt in the lower rail.
5. Pull the glass out of the guide.
6. Carefully tilt the glass forward and remove it upwards.
Behind
7. At the bottom in the middle of the window lift mechanism, disengage the locking bracket.
8. Pull the glass out of the guide and leave it in the door.
9. Remove the guide from the door frame.
Rear non-retractable glass
10. Remove the two screws from the partition. Pull the glass forward together with the seal and remove it.
11. Remove the glass in the other door.
12. When installing the glass later, it should be adjusted. To do this, fix it in the lower rail so that it moves parallel to the guide.