Contents: Adjusting the connection distance B…↡ Adjusting the connection distance C ↡ Adjustment of flatness and…↡ Adjusting the guide wedge ↡
1. Check the connection distances around the door.
Adjusting the connection distance B and gap A
2. Adjust the front connecting distance B and gap A by moving the clamp 3 vertically (see figure 11.7).
Figure 11.7. Side door adjustment:
1. Guide wedge,
2. Slider,
3. Retainer,
4. Lower carriage,
5. Central carriage,
6. Upper carriage.
3. Adjust the front connecting distance B and gap A by moving the side door vertically on the lower carriage 4.
Adjusting the connection distance C
4. Adjust the connecting distance C by moving the central carriage 5 horizontally.
Adjustment of flatness and installation depth relative to the side panel
5. Adjust the flatness by moving the upper 6 and lower 4 carriages horizontally.
6. Adjust the rear installation depth of the side door by moving the retainer 3 horizontally.
Adjusting the guide wedge
7. Adjust the position of slider 2 by moving guide wedge 1.
Article was borrowed from the website (MercedesMAN.ru)
8. Close the side door and check the installation depth relative to the center pillar.
9. Adjust the installation depth by moving the guide wedge horizontally.
10. Check the door for smooth movement.