Removing
1. Remove the small plastic retainer from the regulator lever by carefully prying it out with a small screwdriver (see fig. 32.1).
Pic. 32.1. Remove the small plastic retainer
2. Remove the regulator lever cover (see fig. 32.2).
Pic. 32.2. Remove the lever cover
3. Pry the panel from above, separate its base from the door trim and remove (see fig. 32.3).
Pic. 32.3. Remove decorative panel
4. If the mirror has an electric heater, disconnect the wires at the connector (see fig. 32.4).
Pic. 32.4. Disconnect the electrical connector
5. Loosen the three screws (see fig. 32.5, a) and remove the mirror assembly from the door (see fig. 32.5, b).
Pic. 32.5 a. Loosen three screws...
Pic. 32.5, b....and remove the mirror assembly
Installation
6. Installation is carried out in the reverse order.