Contents: Removal ↡ Installation ↡
Removal
1. Pry up the decorative mirror mounting panel from the top, separate the lower edge from the door trim and remove. Remove the foam rubber gasket.
2. Loosen the screw securing the connector plug and disconnect the plug.
3. Unscrew the three screws and remove the mirror from the door.
4. To remove the regulator motor, remove the mirror glass as described in paragraph 33, then unscrew the three screws securing the electric motor.
5. Fasten the mirror back and hold it in this position.
6. Turn the connector block clockwise and remove the electric motor and wires from the mirror housing.
Installation
7. Installation is carried out in reverse order.