Internal elements of the car body Mercedes C-Class (W203)
Notes on work with interior equipment When working on the interior of the vehicle, keep the following in mind: A plastic wedge, such as HAZET 1965-20, is recommended for removing plastic facings and trims....
Removal and installation of the expansion clamp The expanding clamp consists of the actual clamp and a plastic screw (1) or pin (2). A plastic screw is screwed into the hole in the clamp, or a pin is pressed into the...
Removal and installation of a ware box Removing 1. Remove the center console, refer to the relevant section. 2. Remove the cover of the upper part of the center console, refer to the relevant section. 3....
Removal and installation of a cover under a ware box Removing 1. Remove the luggage net (1). 2. Remove the screws (arrows in the illustration), lower the lid (2) and take it off. Installation 1. Install the cover under the...
Removal and installation of the center console Removing 1. Disconnect the negative cable (-) battery with the ignition off. The cabin air filter box must first be removed. Attention! Before disconnecting the cable,...
Removal and installation of an internal mirror Removing 1. Auto-dimming mirror: Remove the front dome light, refer to Section Replacement of incandescent lamps for interior lighting devices . 2. Auto-dimming mirror:...
Removal and installation of a forward seat Removing 1. Disconnect the negative cable (-) battery with the ignition off. The cabin air filter box must first be removed. Attention! Before disconnecting the cable,...
Removal and installation of a back seat Sedan Removing Note. Removing the rear seat on the Station Wagon and Sports Coupe is carried out in the same way. 1. Release the rear seat and fold it forward. 2. Move...
Removal and installation of the shelf Sedan Removing 1. Release the seatback and fold it forward. 2. Open the trunk and disconnect the cable (1) from the rear seat lock. 3. Remove the C-pillar trim, refer to...
Removal and installation of facing of racks A and B Sedan and Wagon A-pillar Note. Removing and installing the A-pillar trim on the Sports Coupé is carried out in the same way. Removing 1. Remove the trim along the...
Removal and installation of facing of a rack C Sedan Removing 1. Release the rear seat and fold it forward. 2. Turn away a bolt of fastening of a seat belt under a seat. 3. Detach the trim along the C-pillar. 4....