Contents: Removal ↡ Installation ↡
Removal
1. Remove the center console, refer to the relevant section.
2. Remove the upper center console cover, refer to the relevant section.
3. Remove the radio or navigation unit with large monitor, if installed, refer to Section Removal and installation the radio.
4. Remove the mounting screws on the side trim (1) of the upper part of the center console.
5. Remove the cover under the glove box, refer to the relevant section.
6. Remove the screw (arrow on the illustration) under the glove compartment on the left side.
7. Open the glove compartment cover and remove the 2 screws (2) from above.
(Text republished from the website: MERCEDESMAN.ru)
8. Remove the cover on the front passenger side near the instrument panel.
Note: The cover is removed in the same way as the fuse box cover, refer to Section Relays and fuses.
9. Remove 2 screws (3) on the side of the instrument panel.
10. Disconnect the glove compartment light connector.
11. Remove the storage compartment with trim (1) from the upper part of the center console.
Installation
Installation is performed in the reverse order of removal.