Ignition and engine management system Mercedes C-Class (W203)

Ignition and Engine Management System Specifications
Individual characteristics are also given in the text of the Chapter and, if their implementation is mandatory, are highlighted in bold. Ignition/gasoline engine control...

Diagnostics of faults in the ignition and engine management system
P0000 No fault codes in the system memory. P0100 Malfunction in the intake air mass sensor (MAF) circuit. Right bank of cylinders. P0105 Malfunctions in the intake air...

Design of ignition and engine control system
Ignition coils 4-cylinder petrol engine 1 - Front engine cover; 2 - Bolt; 3 - Spacer; 4 - Ignition coil cover; 5 - Bolt M6x25, 9Nm; 6 - Ignition coil; 7 - Spark plug...

Removal and installation ignition coils
4-cylinder petrol engine Note: Removal of ignition coils of 6-cylinder petrol engine is described in Section Checking and replacing spark plugs. Checking the condition...

Checking the ignition and injection control system
1. The control system components are very reliable. Failures are usually due to unreliability or contamination of contacts. Breakdowns in high-voltage wires most often...

Troubleshooting and Preliminary Checks
Ignition control signal oscillograms 1 - Crankshaft rotation angle CKA; 2 - Cylinder number; 3 - Crankshaft position sensor L5 CKP signal; 4 - Signal from Hall sensor...

Checking and adjusting the ignition timing angle
The ignition timing angle is constantly changed by the engine management system. External correction is not possible. The angle can be checked using special equipment...

Spark plugs — condition determination
General description The spark plug consists of a central electrode, an insulator with a housing and a ground electrode(s). A spark jumps between the central electrode...

Diesel engine preheating system
In a cold diesel engine, when the air in the cylinders is compressed, the temperature required for the fuel to self-ignite is not reached. For this reason, preheating is...

Checking diesel glow plugs
If you have difficulty starting the engine, you should check the operation of all glow plugs. The engine must be cold when checking (ambient temperature), battery -...

Removal and installation glow plugs
Removal 1. Turn off the ignition. 2. Remove the top engine covers, refer to Section Removal and installation the top engine cover . 3. Disconnect the glow plug...

Diagnostics of electronic control systems and diagnostic equipment
The OBD system includes several diagnostic devices that monitor individual parameters of the toxicity reduction systems and record detected failures in the on-board...

Diagnostics of electronic engine control systems, injection, ignition and auxiliary brake systems
The list of codes is given in here . Location of the 16-pin diagnostic connector 16-pin OBD II diagnostic connector Pin assignment of the 16-pin diagnostic connector...

Controller for interfacing a personal computer with the on-board self-diagnostic system OBD II
Controller for interfacing a personal computer with the on-board OBD II self-diagnostic system according to SAE (PWM and VPW) and ISO 9141-2 standard protocols. Scheme...

Diagnostics of the electronic system of automatic air conditioning (A/C)
Diagnostic codes can be read from the display of the KV control unit in addition to a special scanner. Malfunction codes are saved even when the battery is disconnected....

Using an Oscilloscope to Monitor Signals in Control System Circuits
Digital multimeters are great for testing static electrical circuits and for recording slow changes in monitored parameters. When performing dynamic tests on a running...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More similar sections for repairing other models

☛ Power unit: Ignition system car Mercedes W168 (1997-2004)
☛ Power unit: Ignition system (V6) car Mercedes W124 (1984-1995)
☛ Power unit: Ignition and control system car Mercedes W463 (1999-2019)
☛ Power unit: Ignition and control system car Mercedes W163 (1997-2005)
☛ Power unit: Ignition and control system car Mercedes W220 (1998-2005)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code

190 (W201) (1982-1993)