4-cylinder petrol engine
Note. Removal of ignition coils of the 6-cylinder petrol engine is described in Section Checking and replacing spark plugs. Checking the condition of high-voltage wires.
Removing
1. Engine 111: Disconnect the cover of the ignition coils (1).
2. Engine 271: Remove engine top cover (1).
3. Disconnect the connector (2) ignition coils (3).
4. Turn out 2 bolts of fastening (4) ignition coils with a Torx key 8 mm.
5. Remove the ignition coil vertically. At the same time, disconnect the connector from the spark plug.
6. Remove all ignition coils in the same way.
Installation
Installation is carried out in the reverse order of removal. Tighten the ignition coils with a torque of 9Nm.