Contents: Removal ↡ Installation ↡
Removal
1. Turn off the ignition.
2. Remove the air intake pipe 1 (see figure 2.123).
Figure 2.123. Ignition coils:
1. Air intake pipe,
2. Decorative panel of the cylinder head cover,
3, 5. Screws,
4. Nozzle,
E83.1, E83.3. Tip,
R9. Ignition coil 1,
R39. Ignition coil 2.
3. Unscrew screws 5.
4. Remove decorative panel 2 of the cylinder head cover.
5. Disconnect the E83.1 and E83.3 tips from the spark plugs.
6. Disconnect the wiring connectors from ignition coils R9 and R39.
7. Unscrew screws 3.
8. Remove ignition coils R9 and R39.
Installation
9. Installation is carried out in the reverse order of removal. Make sure that nozzle 4 is installed correctly.