Contents: Removal ↡ Installation ↡
Removal
1. Disconnect the negative cable from the battery.
2. Remove the air spring in the expansion tank window and disconnect the wiring connectors.
3. Disconnect the M35.1 connector of the "Tempomat" device (see figure 2.128).
Figure 2.128. Control element of the "Tempomat" device:
1. Adjusting rod,
2. Bolt,
3. Tie-down strap,
4. Support.
M35. Control element of the "Tempomat" device,
M35.1. Connector for the control element of the "Tempomat" device.
4. Disconnect the tensioning strap 3.
5. Disconnect the adjusting rod 1 from the regulator of the Tempomat M35 device.
6. Remove the "Tempomat" M35 device.
Installation
7. Installation is carried out in the reverse order of removal. Adjust the Tempomat device.
Text republished from the website MercedesMAN