Doors, locks and windows of the car Mercedes 190 (W201)

Trunk lid — removal and installation
Removal 1. Disconnect the negative battery terminal. 2. Pry up the luggage compartment light, disconnect the wire and remove the light. 3. Remove the wiring harness from...

Trunk lid lock — removal and installation
Removal 1. Open the trunk lid, unscrew the two bolts and remove the lock (see fig. 15.1). Fig. 15.1. Unscrew the bolts (shown by arrows) and remove the trunk lock 2. If...

Interior door trim — removal and installation
Removal 1. Loosen the screw and remove the door lock trim (see fig. 18.1). Fig. 18.1. Remove the decorative door lock cover 2. Carefully pry the plastic cover off the...

Front door window lifter — removal and installation
Removal 1. Remove the door trim as described in paragraph 18 . 2. Lower the window so that you can reach the nut that secures the window lift lever to the glass frame...

Front door glass — removal and installation
Removal 1. Remove the door trim as described in paragraph 18 . 2. Lower the glass to the stop and unscrew the nut securing the window lift lever to the glass frame at...

Rear door window lifter — removal and installation
Removal 1. Remove the door trim as described in paragraph 18 . 2. Lower the glass so that the channel guide can be reached through the hole in the middle of the top of...

Rear Door Glass — Removal and Installation
Removal 1. Remove the door trim as described in paragraph 18 . 2. Lower the glass all the way. 3. Using a plastic wedge, carefully pry up the inner and outer seals from...

Fixed rear door glass — removal and installation
Removal 1. Contact paragraph 22 and perform the actions specified in paragraphs 1 to 7, inclusive. 2. Pull the glass forward and remove it from the door. Installation 3....

Front Door Lock Outer Handle — Removal and Installation
Removal 1. Remove the door trim as described in paragraph 18 . 2. Remove the plug from the rear door torium (see fig. 24.2). Fig. 24.2. Remove the plug 3. Using an Allen...

Front door lock — removal and installation
Removal 1. Remove the front door outside handle as described in paragraph 24 . 2. Loosen the inner handle connecting rod from the guide latch on the door (see Fig. 25.2,...

Rear Door Outside Handle — Removal and Installation
1. The actions are similar to those described in paragraph 24 for the front door handle, except that you don't have to remove the lock cylinder. Instead, remove the...

Rear Door Lock — Removal and Installation
1. The actions are similar to those described in paragraph 25 for the front door lock.

Door lock electromagnets (central locking system) — removal and installation
Removal 1. Remove the door lock together with the solenoid from the front or rear doors, whichever is required, as described in paragraph 25 or 27 . 2. Carefully pry the...

Front and rear doors — removal and installation
Removal 1. On vehicles equipped with central locking or electric windows, remove the door trim as described in paragraph 18 and disconnect the corresponding wires or...

Windshield and rear glass — removal and installation
1. Due to the installation method and the special equipment required to successfully complete the task, removal and installation of the windshield and rear window should...

Door Mirror Glass (Manual) — Replacement
Removal 1. Using a plastic wedge, very carefully pry the ball on the back surface of the mirror glass out of the plastic socket on the mirror housing (see Fig. 31.1, a,...

Door mirror assembly (with manual adjustment) — removal and installation
Removal 1. Remove the small plastic clip from the regulator lever by gently prying it up with a small screwdriver (see fig. 32.1). Fig. 32.1. Remove the small plastic...

Door Mirror Assembly (Electric) — Replacement
1. Using a plastic wedge, very carefully pry up the mirror glass at the three attachment points on the back of the glass. 2. Align the mounting points on the adjustment...

Door mirror assembly (electric) — removal and installation
Removal 1. Pry up the decorative mirror mounting panel from the top, separate the lower edge from the door trim and remove. Remove the foam rubber gasket. 2. Loosen the...

Roof hatch — general information
1. A sliding hatch, either mechanically or electrically operated, is installed as additional equipment. 2. Adjustment, repair of the hatch or its parts should be carried...

Vacuum pump for central locking system — removal and installation
Removal 1. Disconnect the negative battery terminal. 2. Remove the rear seat cushion as described in paragraph 36 . 3. Lift the cover on the sound-absorbing box and lift...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More similar sections for repairing other models

☛ Body: Doors and windows car Mercedes W168 (1997-2004)
☛ Body: Doors, locks and windows car Mercedes W124 (1984-1995)
☛ Body: Doors, locks and windows car Mercedes W463 (1999-2019)
☛ Body: Doors and locks car Mercedes W163 (1997-2005)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code

190 (W201) (1982-1993)