Removing
1. Disconnect the negative battery terminal.
2. Pry off the luggage cover, disconnect the wire and remove the cover.
3. Pull the wiring harness out of the cavity in the trunk lid.
4. Draw around the hinges on the lid with a pencil.
5. Place rags under the lower corners of the trunk lid and, with an assistant, unscrew the mounting bolts (see fig. 14.5). Remove the cover from the car.
Pic. 14.5. Bolts securing the trunk lid to the hinges (shown by arrows)
Installation
6. Installation is carried out in the reverse order. Before tightening the bolts, align the hinges with the marks made before removal. Adjust the lock stop plate to ensure satisfactory closing and opening of the trunk lid (see fig. 14.6).
14.6. Bolts of fastening of a plate of an emphasis of the lock of a trunk lid (shown by arrows)