Contents: Removal ↡ Installation ↡
Removal
1. Remove the door trim as described in paragraph 18.
2. Lower the glass to the stop and unscrew the nut securing the window lift lever to the glass frame at the front (see fig. 20.2).
Fig. 20.2. Unscrew the window regulator lever mounting nut (shown by arrow)
3. Unscrew the two nuts securing the guide channel to the door panel.
4. Disconnect the rear window lift arm from the clip and the guide element from the gutter (see fig. 20.4).
Fig. 20.4. Disconnect the guide element (shown by arrow) from the guide chute
5. Remove the guide element from the window regulator frame, then lift the glass up and into the door opening (see fig. 20.5).
Fig. 20.5. Remove the glass inside the door frame opening
Installation
6. Installation is carried out in the reverse order, but adjust the window regulator as described in paragraph 19.