Removing
1. Remove the door trim as described in paragraph 18.
2. Lower the glass as far as it will go.
3. Using a plastic wedge, carefully pry the inner and outer seals from the top of the door panel.
4. Remove the retainer securing the glass to the guide element of the power window trough.
5. Move the glass back to release the clip on the glass base from the guide.
6. Pull the flexible frame out of the rear chute, then remove the bottom chute-to-door panel bolt and the top chute-to-door frame screw.
7. Move the chute down and remove it through one of the holes in the door panel.
8. Lift the glass up and pull it out from the inside of the door frame opening.
Installation
9. Installation is carried out in the reverse order.