Door mirror installation details
2 - Bolts
6 - Mirror
Door mirror wiring harness
1 - Retainer
3 - wiring harness
X141 - Left mirror wiring connector
X141 / 1 - Right mirror wiring connector
1. Lower the door glass.
2. Remove the door trim panel and insulation film (see Section Removal and installation of an internal upholstery of door assemblies).
Note. Damaged insulating film must be replaced.
3. Release the wiring harness from the retainer. Disconnect the connector (X141 or X141/1).
4. Turn out bolts (2) and remove the mirror (6).
Note. Hold the mirror outside while removing the bolts.
5. Installation is carried out in the reverse order - follow the correct laying of the wiring harness (3), which should not be caught by the glass lowered to the lower position.