Removing
1. Open the trunk lid, unscrew the two bolts and remove the lock (see fig. 15.1).
Pic. 15.1. Turn away bolts (shown by arrows) and remove the trunk lock
2. If a central lock is installed, unscrew the three screws securing the electromagnet (see fig. 15.2) and disconnect the lock actuator rod before removal.
Pic. 15.2. Mounting bolts (shown by arrows) central locking solenoid
3. To remove the solenoid, disconnect the vacuum hose and remove the assembly from the hole in the trunk lid.
Installation
4. Installation is carried out in the reverse order. Adjust the lock stop plate to ensure satisfactory closing and opening of the trunk lid.