Gasoline car injection system Mercedes 190 (W201)
Technical data
General System type - Bosch CIS-E continuous fuel injection system with electronic control The working pressure of the fuel in the system is 5.3-5.5 bar Gasoline pump...
General System type - Bosch CIS-E continuous fuel injection system with electronic control The working pressure of the fuel in the system is 5.3-5.5 bar Gasoline pump...
Basic information and precautions
The fuel tank is mounted vertically in the center behind the rear seats. The fuel tank is made of sheet steel, but later models may have a plastic tank. The fuel gauge...
The fuel tank is mounted vertically in the center behind the rear seats. The fuel tank is made of sheet steel, but later models may have a plastic tank. The fuel gauge...
Fuel injection system — leak
Note: Before working on the power supply system, please read the safety precautions in paragraph 1 . Warning: This procedure only relieves the pressure in the fuel...
Note: Before working on the power supply system, please read the safety precautions in paragraph 1 . Warning: This procedure only relieves the pressure in the fuel...
Air cleaner and filter element — removal and installation
Filter element Removal 1. Remove the nuts from the top cover of the air cleaner. Working around the top cover, release all the latches (see fig. 3.1. a, b). Fig. 3.1, a....
Filter element Removal 1. Remove the nuts from the top cover of the air cleaner. Working around the top cover, release all the latches (see fig. 3.1. a, b). Fig. 3.1, a....
Fuel pump(s) — removal and installation
Removal Warning: Before working on any part of the power supply system, read the safety precautions in paragraph 1 . 1. The fuel pump is located underneath the floor...
Removal Warning: Before working on any part of the power supply system, read the safety precautions in paragraph 1 . 1. The fuel pump is located underneath the floor...
Gas tank — removal and installation
Please contact for information Chapter 4A , however, before starting work on removing the tank, depressurize the system as described in paragraph 2 .
Please contact for information Chapter 4A , however, before starting work on removing the tank, depressurize the system as described in paragraph 2 .
Throttle Cable — Removal, Installation and Adjustment
Removal 1. Working in the engine compartment, disconnect the throttle cable from the guide arm by removing the square mounting block. Release the cable by passing it...
Removal 1. Working in the engine compartment, disconnect the throttle cable from the guide arm by removing the square mounting block. Release the cable by passing it...
Fuel accumulator — removal and installation
Warning: Before handling any part of the power supply system, read the safety precautions outlined in paragraph 1 . Removal 1. The fuel accumulator is located on the...
Warning: Before handling any part of the power supply system, read the safety precautions outlined in paragraph 1 . Removal 1. The fuel accumulator is located on the...
Throttle body — removal and installation
Removal 1. On 6-cylinder engines, depressurize the fuel system as described in paragraph 2 . 2. Disconnect the negative battery terminal. 3. Remove the air cleaner as...
Removal 1. On 6-cylinder engines, depressurize the fuel system as described in paragraph 2 . 2. Disconnect the negative battery terminal. 3. Remove the air cleaner as...
Bosch KE-Jetronic Fuel Injection System Parts — Removal and Installation
Warning: Before handling any part of the power supply system, read the safety precautions outlined in paragraph 1 . Note: After replacing or installing fuel system...
Warning: Before handling any part of the power supply system, read the safety precautions outlined in paragraph 1 . Note: After replacing or installing fuel system...
Intake manifold — removal and installation
Removal 1. Disconnect the negative battery terminal. 2. Contact paragraph 2 and depressurize the power supply system. 3. Contact paragraph 7 and disconnect the throttle...
Removal 1. Disconnect the negative battery terminal. 2. Contact paragraph 2 and depressurize the power supply system. 3. Contact paragraph 7 and disconnect the throttle...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Introduction to guide
- User manual
- Maintenance
- Power unit
- Gasoline engines
- Diesel engines
- Cooling system
- Ventilation and heating
- Supply system
- Injection system (gasoline)
- Injection system (diesel)
- Exhaust system
- Ignition and control system
- Charge and launch systems
- Transmission
- Mechanical gearbox
- Automatic gearbox
- Clutch and drive shafts
- Differential
- Chassis
- Brake system
- Car suspension
- Steering
- Body
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Lighting system
- Electrical diagrams (2000)
- Electrical diagrams (since 2001)
- General information
- User manual
- Driving a car
- Car care
- Maintenance
- Power unit
- Gasoline engines
- Diesel engines
- Lubrication system
- Cooling system
- Heating and ventilation
- Ignition system
- Fuel system
- Injection system (gasoline)
- Injection system (diesel)
- Exhaust system
- Transmission
- Clutch
- Car gearbox
- Chassis
- Suspension, wheels and tires
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Doors and windows
- Electrical equipment
- Equipment and devices
- Power devices
- Lighting system
- Electrical circuits
- General information
- Introduction to the guide
- Operation and care
- Maintenance (gasoline)
- Maintenance (diesel)
- Troubleshooting
- Power unit
- Petrol engine I4
- Petrol engine V6
- Diesel engines
- Engine overhaul
- Cooling and heating
- Power system (carburetor)
- Injection system (gasoline)
- Injection system (diesel)
- Exhaust system
- Charge and start system
- Ignition system (I4)
- Ignition system (V6)
- Diesel heating system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Cardan shaft and axle shafts
- Chassis
- Brake system
- Car suspension
- Steering
- Body
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Electrical equipment
- Equipment and devices
- Electrical circuits