Removing
1. Remove the door lock and solenoid from the front or rear doors, whichever is required, as described in paragraph 25 or 27.
2. Gently pry the plastic cover off the top of the solenoid and lock link arms (see fig. 28.2).
Pic. 28.2. Pry off the plastic cover
3. Push the end of the latch up, then remove it from the shaft of the inner button of the lock (see fig. 28.3).
Pic. 28.3. Remove the retainer (shown by arrow)
4. Remove the lock release button bar to release the solenoid control rod and remove the solenoid (see fig. 28.4, a-c).
Pic. 28.4, a. Remove the lock button bar...
Pic. 28.4, b....remove the solenoid rod...
Pic. 28.4, c....and pull out the solenoid
Installation
5. Installation is carried out in the reverse order.