Station wagon
Removing
1. Tilt the rear seat forward and place it upright.
2. Remove a lateral pillow of a back seat, thus turn out a bolt under a seat and take out a pillow from holders.
3. Remove the cover with a screwdriver (1).
4. Remove the bolt (2) and remove the left luggage eye.
5. Remove also the right luggage eyelet.
6. Remove the bottom cover (3) behind the rear seat.
7. Turn out the screw stop (4) for the roller. Remember its position: After installation, the roller must be in contact with the right and left screw stops.
8. Remove the side opening cover.
9. Remove 2 screws (5).
10. Disconnect the socket (6) and remove the side trim (7).
Installation
Installation is carried out in the reverse order of removal.