Sedan and station wagon models
1. Unscrew the door lock release button from the top panel and fully raise the door glass.
2. Release the plastic insert of the power window handle from the latch, slide it towards the handle and remove (only for doors with power windows).
3. Note the position of the handle and remove it along with the trim (only for doors with power windows).
4. Take out from a nest and remove facing of the internal handle of a door. On a door with a power window, disconnect the switch.
5. Remove the bezel (one screw), then remove the upper screw securing the armrest.
6. Turn out the bottom screws of fastening and remove an armrest.
7. Turn out two screws and remove facing of the lock.
8. On the rear door, remove the ashtray, raise the stop and remove the ashtray socket.
9. Using a screwdriver with a wide blade, disconnect the upholstery panel from the door. Insert a screwdriver near the latches so as not to damage the upholstery.
10. Take out the upholstery panel from the top latches and remove it from a door. On the front doors, you need to disconnect the inner hook, and on the rear — release the latch near the ashtray.
Coupe models
1. Turn out screws and remove an overlay from an end face of a door over the lock and small facing.
2. Depending on the configuration, release the plastic insert of the power window handle from the latch, shifting it to the handle, and remove.
3. With the door glass raised, mark the position of the power window handle, then remove it together with the trim (only for doors with power windows).
4. Remove the lining of the locking lever (one screw).
5. Remove facing of the internal handle of a door, turn away the screw and remove a frame.
6. Turn away screws of fastening and remove an armrest.
7. Using a wide blade screwdriver, pry the upholstery panel off the door, inserting the screwdriver near the latches so as not to damage the upholstery. In this case, it is necessary to release the front edge of the panel from additional latches.
8. Remove the rear edge of the panel from the latches while releasing it from the lock lever.
9. Lifting the front of the panel, release it from the inner hook and remove it from the door.
All models
1. If necessary, carefully remove the plastic apron from the door, being careful not to tear it.
2. Install in the reverse order of removal, putting the latches in the correct position before installing the upholstery panel.