Repair of interior elements of W168 cars from March 2001.
Glove box — removal and installation Removal 1. Press the right side of the air duct cover 1 under the glove compartment 2 upwards, and then remove it by pushing it to the right (see arrow in illustration)....
Glove box lid — removal and installation Removal 1. Unscrew the four bolts 1 securing the glove box lid hinges (see illustration). 2. Remove the clamps (see arrows in the illustration), tape stop 2 and shock...
Center console cover — removal and installation Removal 1. Remove the radio receiver, see the relevant chapter . 2. Press the locking tabs 2 through the radio mounting hole and remove the console pocket trim or CD...
Front Center Console — Removal and Installation Removal 1. Remove the rugs from the floor. 2. Remove the rear part of the center console, see the relevant chapter . 3. Remove the lower console trim by pushing it back...
Ashtray on the center console — removal and installation Removal 1. Move the ashtray lid 1 forward (see arrow in illustration) and release it from the fasteners 2. 2. Feed the ashtray body 3 in the direction of the arrow (see...
Rear of the center console — removal and installation Removal Note: Some steps are the same as when removing the rear part of the center console on cars produced before 2/01, where they are described in sufficient detail....
Front pillar trim — removal and installation Removal 1. Remove seal 2 from front pillar on trim 1 (see illustration). 2. Carefully pry up plug 3 with a small screwdriver, remove it and unscrew the socket head bolt...
Instrument panel — removal and installation Removal 1. Remove the cover from the center console, see the relevant chapter . 2. Remove the lower instrument panel trim in the driver's side footwell, see the relevant...