Gearbox assembly and repair Mercedes A-Class (W168)

Manual Transmission Specifications
Tightening torques for threaded connections of the 716.5 series manual transmission The 716.5 series manual transmission has modifications 716.500, 716.501, 716.502,...

Manual gearbox — removal and installation
Removal The gearbox is removed from the engine compartment together with the engine. 1. Lower the engine on the front beam ( see the relevant chapter ). Attention! To...

Gear shift mechanism — removal and installation
1. Press the latches of cover 1 on the center console (see arrows in the illustration) and remove the lid. 2. Disconnect the R3 x 1 plug (see illustration 2.1). 3....

Clutch — removal and installation
It is assumed that the power unit has been removed. 1. Drain the transmission oil from the gearbox. 2. Disconnect the gearbox from the engine. 3. Secure the gearbox to...

Differential, primary and secondary shafts — removal and installation
1. Drain the transmission oil from the gearbox. Caution! When installing, lubricate the drain plug with sealant. 2. Remove the gearbox and install it on the stand. 3....

Automatic transmission — removal and installation
Since 1/98, the Mercedes A-Class can be equipped with a 5-speed automatic transmission series 722.7 with electronic control and four positions of the control lever P, R,...

Gear Selector Cable — Removal and Installation
1. Remove the boot from the automatic transmission control lever. 2. Remove the center console by first removing the rear part, then the center part, and finally the...

Gearbox parking lock mechanism
1. Remove the gearbox. 2. Disconnect the locking dog 1 (see illustration). Attention! Before dismantling, mark the installation position of spring 2. The installation of...

Gear Selector Cable — Adjustment
Caution! When making adjustments, the gear selector cable must be secured to the gearbox and to the gearshift mechanism, and the cover of the regulator 1 must be opened...