Removing
1. Remove the cover from the center console, see relevant chapter.
2. Remove the lower instrument panel trim in the footwell on the driver's side, see relevant chapter.
3. Remove the glove box, see relevant chapter.
4. Remove facing of a forward rack, see relevant chapter.
5. Remove the instrument panel, see relevant chapter.
6. Unscrew bolt 1 (see illustration).
Attention! In the illustration, the instrument panel has not yet been removed.
7. Unscrew the mounting bolts 3, which secures the front of the center console (see illustration).
8. Unscrew from the right and left sides of the central console on one bolt 4 (see illustration).
Attention! The illustration shows the location of the mounting bolts on the installed instrument panel.
9. Unscrew bolt 5 on the right side of the instrument panel behind the glove box (see illustration 19.8).
10. Raise the instrument panel 6 and disconnect the multi-pin plug 7 of the light alarm switch (see illustration 19.8).
Installation of the instrument panel is carried out in sequence; reverse withdrawal.