Sequence of work
1. Loosen two hex bolts at the top and bottom of the door body.
2. Adjust clearances. Tighten the bolts.
3. Loosen the hex bolts on the strut and turn the middle TORX bolt to adjust the installation in relation to the plane of the front fender.
Pic. 11.26. Pin of the lock of a front door (the arrows show the rear door hinge bolts): 1 - trunnion of the lock; 2 – door contact switch; 3 - bolts for fastening and adjusting the trunnion of the lock
4. Adjust pin 1 (pic. 11.26) lock for flush mounting front and rear doors.