Sequence of works
1. Open the trunk lid.
Fig. 11.11. Removing the hinge trim
2. Remove the hinge trim (fig. 11.11).
3. Using a wide screwdriver, carefully remove the trunk lid trim from the latches.
4. Disconnect the connectors of the number plate light, boot light contact switch and central locking system vacuum hose. Unfortunately, they are not connected together.
5. Holding the trunk lid with an assistant, unscrew the two hinge mounting bolts on the left and right.
Fig. 11.12. After removing the inner trim of the trunk lid, access to both hinge mounting bolts (arrows) is available: 1 – trunk lid; 2 – hinge lever
Fig. 11.13. Before unscrewing the hinge mounting bolts on both the sedan and the station wagon rear door (T-model), their position should be marked
6. Remove cover 1 (fig. 11.12) trunk made of loops (fig. 11.13).