Sequence of work
1. On vehicles with an armrest between the front seats, open the drawer.
Models with manual transmission
2. Slide the cover down along the lever. Together with the casing, grab the lining of the lever hole and pull it up. If necessary, carefully pry off the lower edge of the trim at the front with a suitable tool (from the side of the glasses box) and behind until it disengages.
Models with automatic transmission
Pic. 10.32. Removing the selector lever frame
3. Carefully pry the frame around the selector lever from the sides (pic. 10.32). Then pry off the lining from the side of the leading edge and the selector lever.
All models
4. Take out a contact socket from a back of facing. Due to its shape, its position cannot be confused.