Removing
1. Remove the oil filter.
2. Remove and disconnect the oil cooler 9 from the oil filter housing 4 together with the attached cooling system pipes (see fig.4.43).
Pic. 4.43. Oil filter housing:
1, 2. Bolt,
3, 6. Caliper,
4. Oil pump housing,
5. Oil filter,
7. Gasket,
8. Adjusting sleeves,
9. Oil cooler,
10. Starter wiring,
11. Fuel lines,
AT 11. Oil pressure sensor.
3. Remove the B11 oil pressure switch.
4. Detach the retainers and straps (arrow) from calipers 3 and 6.
5. Remove the oil pump housing 4.
Installation
6. Installation is made in an order, the return to removal. Wipe the sealing surfaces and replace the gasket 7.