Removing
Oil filter housing installation details
1 - Exhaust gas recirculation pipe; 2 - Tube to the oil pressure sensor (engines 601.911); 9 - Seals; 270 - Gasket; 271 - Cover fastening nut; 273 - Oil pump cover; 275 - Oil pump housing; 280 - Filter element; 296 - Oil pressure sensor
1. Remove the air cleaner.
2. Remove the bolt (276) fixing the oil filter cover.
3. Remove the filter element (280).
4. Disconnect the tube (1) between the EGR valve and the intake manifold or turbocharger from the oil filter housing.
5. Unscrew the injection tube (2).
6. Disconnect the wiring connector from the oil pressure sensor (296).
7. Remove the bolt (291) from the oil filter flange.
8. Remove the oil filter housing (275) from cylinder block with gasket (270).
9. Wipe the sealing surfaces and replace the gasket (270).
Installation
Installation is carried out in the reverse order of removal. Replace seals (9).