Removing
1. Remove the radiator.
2. Unscrew the drain plug 1 from the oil filter housing 2 and drain the oil (see fig.3.29). Replace O-ring.
Pic. 3.29. Oil filter housing:
1. Drain plug,
2. Oil pump housing,
3. Bolt,
4. Cylinder block,
5. O-rings,
6. Oil pressure sensor.
3. Unscrew the bolts 3 fastening the oil pump housing 2 to the cylinder block 4.
4. Disconnect the connector from the oil pressure sensor 6.
5. Remove the oil filter housing 2.
Installation
6. Installation is made in an order, the return to removal. Replace gasket 5.