Examination
See Section Checking the condition of the crankshaft.
The dimensional characteristics, the values of the working clearances of the bearings and the axial play of the crankshaft are given in Specifications.
Replacing the front crankshaft oil seal
Replacing the front crankshaft oil seal
2 - Central bolt M18x1.5x50; 3 - Bushing; 8 - Key; 9 - Mounting sleeve; 12 - Pulley with torsional vibration damper; 13 - Hub; 20 - Seal
1. Remove the coolant pump pulley (10).
2. Install the retainer (3) onto the flywheel.
3. Remove the pulley (12) with the crankshaft vibration damper.
4. Using a screwdriver, press out the oil seal (20).
Installation
Installation is carried out in the reverse order of removal.
Replacing the rear crankshaft oil seal
Replacing the rear crankshaft oil seal
1a, 1b, 2 - Installation tools
21 — Seal
1. Remove the gearbox.
2. Remove the flywheel.
3. Using a screwdriver, press out the oil seal (21).
Installation
Installation is carried out in the reverse order of removal.