Contents: Removal ↡ Installation ↡
Removal
Engine Oil Pan Installation Details
1. Disconnect the negative cable from the battery.
2. Lift the engine casing and secure it over the fan.
3. Unscrew the front engine mounts (23) from the brackets (1).
4. Install the hoist (01) on the engine and lift it up.
5. Raise the front of the engine with a lift.
6. Disconnect the steering shaft from the steering joint (2).
7. Unscrew the brackets and lower it.
8. Disconnect the wiring connector from the oil level sensor.
9. Unscrew the bolts (19) and (19a) securing the pan.
10. Remove the pan (24) together with the gasket (25).
Installation
Installation is carried out in the reverse order of removal.